CMT IP Cam w Installationsanleitung Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 183
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
Current Consumption 500 mA | 650 mA IVA (12 VDC)
500 mA | 650 mA IVA (24 VAC)
200 mA (PoE 48 VDC)
Power Consumption 6 W | 7.8 W IVA (12 VDC)
7.4 W | 9.7 W IVA (24 VAC)
9.6 W (PoE 48 VDC)
Sensor
Type 1/3-inch, CCD
Active Pixels (PAL)
752 x 582
Active Pixels (NTSC) 768 x 494
Video
Video compression H.264 (ISO/IEC 14496-10); M-JPEG,
JPEG
Data rate
9.6 Kbps to 6 Mbps
Resolution Horizontal x vertical (PAL/NTSC ips)
4CIF 704 x 576/480 (25/30 ips)
CIF 352 x 288/240 (25/30 ips)
Overall IP Delay
Min. 120 ms, Max. 240 ms
GOP structure I, IP, IBBP
Frame rate 1 to 50/60 (PAL/NTSC) H.264
1 to 25/30 (PAL/NTSC) M-JPEG
Video Out
Signal Analog composite (NTSC or PAL) for
service
Connector
2.5 mm jack, 75 Ohm
Horizontal resolution 540 TVL
Video S/N
50 dB
Sensitivity (3200 K, scene reflectivity 89%)
Full video
(100 IRE)
Usable
picture
(50 IRE)
Minimum
illumination
(30 IRE)
NDC-455V03 (F1.2)
Color
2.6 lx
(0.26 fc)
0.65 lx
(0.065 fc)
0.30 lx
(0.03 fc)
NightSense 1.04 lx
(0.104 fc)
0.26 lx
(0.026 fc)
0.012 lx
(0.0012 fc)
NDC-455V09 (F1.4)
Color
2.9 lx
(0.29 fc)
0.75 lx
(0.075 fc)
0.37 lx
(0.037 fc)
NightSense 1.25 lx
(0.13 fc)
0.30 lx
(0.03 fc)
0.14 lx
(0.014 fc)
Color/NightSense Auto, Forced
Signal-to-noise Ratio > 50 dB
Dynamic Range 60 dB (10-bit processing)
BLC
Center window weighting
Gain 20 dB (max)
White Balance ATW, ATWHold (2500 to 10000 K)
Shutter
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
Auto Black Automatic continuous, Off
Privacy Masking
Four independent areas, fully
programmable
Video Motion Analysis Motion+ or IVA
Test Pattern Generator Color bars 100%, Grayscale 11-step,
Sawtooth 2H, Checker board, Cross hatch,
UV plane
Synchronization
Internal, Line Lock, selectable
Controls OSD with soft-key operation (multi-lingual)
Audio
Standard G.711 300 Hz to 3.4 kHz at 8 kHz sampling rate
Signal-to-noise ratio
> 50 dB
Input/output
Audio
1 x mono line in, 1 x mono line out
signal line in
9 kOhm typical, 5.5 Vpp max
signal line out 3.0 Vpp at 10 kOhm typical,
2.3 Vpp at 32 Ohm typical,
1.7 Vpp at 16 Ohm typical
Alarm
1 non-isolated closing contact
activation
voltage
+5 VDC to +40 VDC
(+3.3 VDC with DC-coupled 22 kOhm pull-
up resistor)
Relay
1 output
voltage 30 VAC or +40 VDC
Maximum 0.5 A continuous, 10VA
Software Control
Unit Configuration Via web browser or Configuration Manager
Flicker Control 50/60 Hz, selectable
Software update
Flash ROM, remote programmable
5 | NDC-455 FlexiDome IP Cameras
EXHIBIT B
5/7/2013 - LBUSD - BOSCH SECURITY CAMERA SYSTEMS
13 of 183
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 182 183

Kommentare zu diesen Handbüchern

Keine Kommentare